:	Aug 2, 2004

.

Disconnect the battery ground cable.

.

Remove the turbocharger.

.

: Protect the engine during this operation. Support the engine.   Raise the engine clear of its LH mount.

.

Remove the engine mount.   Remove the retaining nut.   Raise the engine clear of its LH mount.   Remove and discard the two retaining bolts.

.

Install the engine mount.   Clean the component mating faces.   Install new retaining bolts.   Tighten the bolts to 45 Nm (33 lb.ft), then a further 60 degrees.

.

: Protect the engine during this operation. Lower the engine onto its mount.

.

Install the engine mount retaining nut.   Tighten the nut to 90 Nm (66 lb.ft).

.

Install the turbocharger.

.

Connect the battery ground cable.